Jump to content

Handset Secrets


Recommended Posts

Nokia Secrets

This Codes Are For Nokia Phones Only

- Show IMEI Code

If you want to know what's the IMEI code of your phone, press:


- Sim Lock Information

To check if the Sim-Clock can be stopped type:


- Software Version

This code shows you software version, date of manufacture and hardware model number of your phone.

* # 0000 #

- Show Service Menu

To get additional information from your phone you can use the so called "warranty codes", try typing:


You'll get the following

serial number

manufactured date

date of purchase (if entered)

date of the last repair transfer user data (It may wok and it may not)

- Service Provider Lock

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SI M card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y# This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w characters.

'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Provider(???)-Lock status

#pw+1234567890+4# for SimCard-Lock status (master code) is a 10 digit code, based on the phones IMEI number. (I can NOT give you the master c ode - SO DON'T ASK US FOR IT !!!!!!!)

e.g. To remove restriction on lock 1 type following code: #pw+(master code)+1

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code) eg. To check if phone if restricted on lock 1 type the following code: #pw+1234567890+1#

To get "p" - Press "*" three times

To get "w" - Press "*" four times

To get "+" - Press "*" two times

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone

( consumes more power )

Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

This function is NOT available on 8810

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitati on Linear Prediction) compression technology.This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits. (but you take up more space on thenetwork, so they can charge you more) - Talk-time is reduced with about 5% Half Rate will give you bad soundquality, which gives the serviceprovider the to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time

Link to comment
Share on other sites

  • 3 months later...

Upload UR Handset for Free ............

Hey Buddies this is how to reload your hand phone every month for free. Engineered by a group of rebel programmers. Now I am going to share this to all for you.

Please follow the instructions as stated below before you start it:

It is done illegally of course.

You can only do this every 24th & 25th(or as applicable) of the month as the network system is under upgrade.

1.) ** Dial "1415007" using your h/phone and wait for 5 second

2.) ** after 5 second, you will hear some funny noise (like sound from TV when the station is finish)

3.) ** Once the noise stop, immediately dial 9151 follow by your phone number

4.) ** A recorded message "please insert your pin number" will follow

5.) ** punch in the pin number "011785 45227 00734" and wait for the operator finish repeating the above pin number.

6.) ** After the pin number has been repeat, dial "0405".

7.) ** you will hear a message "for air time top-up press 1723" you just have to follow the instruction

8.) ** After you follow the instruction, the noisy sound will

re-appear for about 5 second

9.) ** once the noise stop, dial "4455147" follow by "146"

10.) ** after about 5 second, dial "1918" after 3 second dial "4451"

11.) ** after you done that, punch in the serial number "0117

4452271145527" you will hear dial tone.

12.) ** once the dialing tone stop, dial "55524785933" you will hear "please key in your password"

13.) ** the password is " ****2+253+7891*+546322 " wait for the

message "your password accepted"

14.) ** you will hear " please insert your emey number " now you have to be fast to dial your own h/phone number

15.) ** you will hear a dialing tone, when the call is answered, dial"1566" and you will hear "re-confirm emey number"

16.) ** once you hear that message, dial "6011556 2245334 follow by your h/phone number"

17.) ** after a while, you will hear a message "your pin number is accepted" you have to dial "1007"

18.) ** after you done that you will hear "your emey number is


19.) ** continue dial "4566" you will hear "your password is accepted"

20.) ** once the second message finish, immediately dial your own h/phone number

21.) ** Now you will receive a message saying ...........




























Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...